120 inch projector vs 98 inch TV

The projected picture is a big step up from the biggest mainstream TV here: 50% more area from the same wall.

Dimensions, picture only

	98 inch TV	120 inch projected
Width	85.4 in (217.0 cm)	104.6 in (265.7 cm)
Height	48.0 in (122.0 cm)	58.8 in (149.4 cm)
Picture area	4104 in²	6153 in² (+50%)
PPI at 4K	45	37
Cinematic seat	9.8 ft (3.0 m)	12.0 ft (3.6 m)
4K 60 PPD distance	6.4 ft (1.9 m)	7.8 ft (2.4 m)

The honest trade

Size is the projector's whole argument, and it is a strong one: THX's cinematic 40 degrees of view needs the 120-inch picture from 12.0 ft (3.6 m), a distance where the 98-inch TV fills noticeably less of your vision. Per inch of picture, nothing touches a projector.

Everything else favors the TV. A TV makes its own light, so it wins every daylight and lights-on session; a projector's blacks and colors are only as good as your room is dark. The TV needs no throw distance, no screen surface, no bulb or laser aging, and carries its own speakers and tuner. The usual resolution: projector for movie nights, TV for everything the room does in daylight, and this size class is where the budgets genuinely overlap.

At 4K, the larger picture has lower central PPD from the same seat. The reference distances above show where each reaches 60 PPD; crossing that reference does not make them equally sharp. Projector light output, contrast, focus and room lighting also affect the result.

Pricing the two? See 4K projectors and 98-inch 4K TVs on Amazon.

Open this comparison in the calculator, drawn to scale

Reading this on an iPhone? Open it in the calculator and tap "Setup on your wall" to see the screens in your room at true physical size, in augmented reality.

Common questions

Is a 120 inch projector better than a 98 inch TV?

For dark-room movie nights, usually yes: 50% more picture from the same wall, and the cinematic 40 degree view from a comfortable 12.0 ft (3.6 m). For daytime and lights-on viewing the TV's own light output wins; a projected picture washes out with ambient light.

How far should you sit from a 120 inch screen?

For the cinematic 40 degrees of view, about 12.0 ft (3.6 m). At 4K the picture stays at the 60 PPD reference from 7.8 ft (2.4 m), without guaranteeing perceptual equivalence.

How these measurements are calculated

For a diagonal d and aspect ratio w:h, screen width is d × w / √(w² + h²), and height is d × h / √(w² + h²). Area is width × height; PPI is √(horizontal pixels² + vertical pixels²) / diagonal in inches. Results are rounded for display.

Screen dimensions exclude the frame, feet and stand. Check the manufacturer's measurements for furniture and mounting clearance. A flat-screen viewing angle is 2 × atan(width / (2 × eye-to-screen distance)). The 40° cinema target is a preference, not a requirement; adjust the viewing angle for your room. It is approximately equivalent, for a 16:9 screen, to the distance × 0.835 sizing rule in the THX viewing guide.

The 60 central pixels-per-degree reference is a rule of thumb, not a guarantee that two displays look identical. Eyesight, contrast, source quality and panel technology also matter. Check sharpness at your own viewing distance.

Every number on this page is computed from resolution and diagonal with the DisplayMath screen size calculator. Free, no signup, runs in your browser. Content updated 2026-09-09. Feedback? Email hello@displaymath.com or find us on Instagram. About · Privacy and affiliate disclosure. © 2026 DisplayMath. All rights reserved.